FITMENT
- Receiver Size: Fits all standard 2-inch hitch receivers (Class III, IV, and V).
- Ball Size: Equipped with a 2-inch chrome-plated trailer ball.
DESCRIPTION
Product Overview
- Transform your vehicle’s rear receiver into a heavy-duty, multi-angle recovery anchor. The Seguler 2" Receiver Trailer Hitch Mount with Shackle provides a safe, high-strength tie-in point for trail rescues, farm work, and heavy equipment towing.
- Forged from solid structural steel and tested to an impressive 38,500 lbs ultimate breaking strength, this receiver block features a dual-pin orientation shank so you can mount the shackle vertically or horizontally. Complete with a 3/4" bow shackle, noise-dampening rubber isolators, and a 5/8" keyed locking hitch pin, Seguler delivers maximum pulling force, rattle-free driving, and security against theft.
Key Features
- Pairs a 2" chrome ball for towing with a 3/4" D-ring shackle for recovery on a single bridge, so both live on the truck permanently.
- Rates the shackle side for 38,500 lbs break strength for serious extractions, while the ball side handles towing up to the vehicle’s capacity.
- Welds the ball-mount bridge to the shank at multiple points, removing the weak spots of bolt-on dual-purpose hitches for one solid unit.
- Keeps a clean black powder-coated body with a bright red D-ring that’s easy to spot in low light and a chrome ball that resists coupler corrosion.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty Steel |
| Receiver Size |
2" |
| Ball Size |
2" Chrome-Plated |
| Shackle |
3/4" D-Ring |
| Break Strength |
38,500 lbs |
| Lock Pin |
5/8" Secure Lock Pin |
| Finish |
Black Powder Coat (Body), Red (Shackle), Chrome (Ball) |
Safety & Testing
Every hitch component is crafted from premium, high-strength materials and engineered to meet rigorous industry towing safety standards. Our weight and break strength ratings are backed by extensive laboratory load and stress testing to ensure reliable, heavy-duty performance under tough, real-world conditions. Every product undergoes strict multi-stage quality control and anti-corrosion testing before leaving our facility to guarantee maximum safety, structural integrity, and long-term peace of mind on the road.
FAQ
Q: Can I tow and recover at once with it?
A: No — you’ll do one or the other. Tow off the ball, recover off the shackle. The benefit is that both stay on the truck, so there’s nothing to swap when you need the other.
Q: Can I change the 2" ball to another size?
A: Yes — the ball is held by a big hex nut and spring washer underneath, so it’s fully replaceable. Break it loose with a large wrench, thread in a 1-7/8" or 2-5/16" ball, and torque it back down — more flexible than a permanently welded ball.
Q: Is the shackle for towing or just recovery?
A: Recovery only. The shackle isn’t a ball — never clip a trailer coupler to it. Use the 2" ball on the opposite side for any towing.
Q: What if I want a dedicated ball mount or a heavier recovery receiver?
A: For towing only, the 6,000 lbs ball mount is the simple choice. For extreme pulls, the 70,000 lbs D-ring receiver steps up recovery strength.
