FITMENT
- 2014-2025 Chevy Silverado Sierra 1500
- 2014-2019 2500HD 3500 HD 6.5/6.6 FT Bed. Not for CarbonPro Bed.
DESCRIPTION
Product Overview
- An open truck bed exposes your cargo to rain, snow, road grime, and theft, while creating aerodynamic drag that lowers fuel efficiency. The 6.5ft Soft Roll-Up Tonneau Cover provides a durable, low-profile bed protection solution engineered specifically for the 6.5-foot (78.7" / 6'6" Standard Bed) box on 2014–2018 GMT900-platform GM full-size trucks.
- Constructed from heavy-duty 24oz double-sided marine-grade vinyl and supported by high-strength aluminum crossbars, this cover seals your truck bed against harsh weather while rolling up neatly to the cab in seconds for full bed access.
Key Features
- Full Bed Access: Rolls up smoothly toward the cab and fastens with dual heavy-duty nylon safety buckles so you can haul oversized cargo without removing the cover.
- Heavy-Duty 24oz Marine-Grade Vinyl: Tear-resistant, double-sided coated vinyl engineered with UV inhibitors to prevent fading and withstand severe temperatures down to -30°F.
- Weather-Tight Perimeter Seal: Features built-in rubber weather stripping, heavy-duty side Velcro seals, and corner foam padding to keep water, snow, and dust out of your bed.
- Improved Aerodynamics: Sits flush with bed rails to reduce drag at highway speeds, helping improve overall gas mileage.
- No-Drill Clamp-On Installation: Side rails clamp directly onto the inside lip of your bed using heavy-duty aluminum C-clamps—installs in under 30 minutes with basic tools.
Specifications
| Spec |
Detail |
| Material |
Heavy-Duty PVC (Polyvinyl Chloride) |
| Bed Length |
6.5FT |
| Rail Material |
Aircraft-Grade Aluminum Alloy |
| Cover Type |
Soft Roll-Up |
| Installation |
No-Drill Clamp-On |
Installation Overview
This cover installs in 20–40 minutes with basic hand tools — no drilling, no cutting, no permanent modifications. The aircraft-grade aluminum side rails clamp directly onto your factory bed rails. Position the rails, tighten the clamps, roll out the fabric, and adjust the tailgate tension for a weather-tight seal. One person can handle it; a second set of hands cuts the job in half.
FAQ
Q: How do I adjust the cover tension when transitioning between hot summer and cold winter weather?
A: Vinyl naturally expands in heat and contracts in cold. Use the tension control block located near the front bulkhead. Loosen the adjustment bolts slightly in summer to prevent over-stretching, and tighten them in winter to keep the vinyl drum-tight.
Q: What should I do if a small amount of water enters near the tailgate corners after heavy rain?
A: Truck beds are not hermetically sealed units, but water entry can be minimized by installing the included front bulkhead foam tape and pressing down the side Velcro strips firmly. Adding extra weather-stripping along the inner edges of the tailgate will eliminate minor gaps.
Q: Can I install this cover if my truck has a toolbox or ladder rack installed?
A: This cover is designed for standard beds without large toolboxes mounted directly behind the cab. However, it is fully compatible with standard bed rails, tie-down anchors, and stake pocket mounts since the side rails clamp inside the inner bed lips.
Q: Will this cover work with the 2019 "Silverado LD" or "Sierra Limited" models?
A: Yes! The 2019 "LD" (Light Duty) and "Sierra Limited" models retained the 2014–2018 K2XX body style and bed dimensions. If your 2019 model has the classic K2XX body with a 6.5ft bed, this kit will fit perfectly.
