Seguler Power Heated LED Signal Towing Mirrors Pair for 2004-2018 Ford F150

FITMENT

⚠️ Fitment is variant-specific. The table below covers ALL variants on this page — only the option you select in the dropdown matches your truck.

Verify your model year before ordering.

DESCRIPTION

Product Overview

• Stock F-150 side mirrors fall short when you're towing — their limited reach leaves wide trailers partly hidden, and bolt-on extension pods add bulk and wind noise. This 2004–2018 Ford F-150 Telescopic Towing Mirror Package solves both problems with a direct-fit OEM-style replacement.
  
• Every variant pairs power-adjust glass with a manual lower convex blind-spot mirror, heated defrost, and dual-arm telescopic extension, all wrapped in a tough black ABS housing contoured for flush door mounting. The only thing that changes by year is the door mounting footprint — and, on 2015+ models, the square 8-pin connector.

Key Features

• Molds high-strength, weather-sealed ABS around vibration-isolated glass, precision-contoured to match factory door mounting points for a flush, no-gap fit with zero drilling.
  
• Syncs with factory cabin switch controls for precise flat-glass positioning, with rapid-defrost heating elements that clear frost, ice, and fog fast.
  
• Integrates amber LED turn signals into the housing for clean side signaling; 2007–2014 models add white puddle/courtesy lights that brighten the ground by your doors.
  
• Extends on heavy-duty twin-shaft manual slide arms for a clear view past wide trailers, then retracts for everyday driving.

IMPORTANT — Read Before You Buy

• For full plug-and-play operation, your truck must carry the matching factory features. If any option is absent from the factory, custom wiring will be required and that specific function may not work. Always confirm your truck's factory options before ordering.

FAQ

Q: Which year range fits my F-150?

A: Match your truck's model year to the dropdown — 2004–2006, 2007–2014, or 2015–2018. If yours is a 2015–2018, also confirm it has the square 8-pin connector; these mirrors do not fit 22-pin or factory BSM trucks.

Q: How do I tell an 8-pin from a 22-pin connector on a 2015–2018 F-150?

A: Look at your factory mirror harness. The 8-pin is a single rectangular plug with eight wire positions. The 22-pin is a larger connector used on higher-trim trucks with extra electronics such as blind-spot monitoring. These mirrors work only with the 8-pin system.

Q: Are these plug-and-play?

A: Yes — provided your truck came from the factory with power, heated, and turn-signal mirrors. They connect to your existing door harness. If a factory option is missing, custom wiring will be needed for that function.

Q: Do the 2007–2014 puddle lights turn on automatically?

A: Yes. The white LEDs mounted on the underside of each mirror light up when you unlock the truck, open a door, or use the courtesy light switch.

Q: Do I need to remove any protective film?

A: Always inspect your mirrors before installation and peel off any protective film from the glass. Follow the included instructions for proper alignment.